The Fusion 500 is a call router that can choose between two telephone networks. Calls on the incoming port are routed to one of two outgoing ports based on the telephone number that was dialled. The Fusion 500 analyses numbers as they are dialled and chooses one of the two outgoing ports based on its internal pre-programmed routing tables.
In its simplest configuration, the Fusion 500 can be used to route telephone calls to either a fixed-line network or a mobile network adaptor (Fusion 100). It can also be used to choose between two Fusion 100 units that are set up for two different network providers.
A number of Fusion 500 units can also be cascaded to provide more complex routing options.
Benefits:
No PABX programming required
Primary lightning protection on Line 1
Defaults to Line 1 in the event of a power outage
Cost-effective
POWER SPECIFICATIONS:
DC input voltage range: 4V to 15V DC
DC input termination: 2.1mm barrel DC jack
DC input protection: Reverse polarity, over-voltage and over-current protection to 60V DC
DC current: 25mA (maximum)
MECHANICAL SPECIFICATIONS
Dimensions (L x B x H): 116mm x 79mm x 30mm
Weight:200g
Material: Aluminium extrusion
LED indicators: Power, phone status, line 1 & line 2 status
ENVIRONMENTAL SPECIFICATIONS:
Operating temperature: -10°C to 50°C
Humidity: 95% humidity at 35°C (non-condensing)
Safety: IEC 60950: 1999
EMC conformance: CISPR 22 Class B, CISPR 24 IEC 61000-4-3, IEC 61000-4-11
LINE INTERFACE SPECIFICATIONS
Line termination: Standard RJ-11 socket
Line protection: Primary and secondary over-voltage / over-current protection
Protective earth for line 1: Screw Terminal
DATA PORT INTERFACE
Programming port: RS232 Serial Data Port
PHONE PORT SPECIFICATIONS
Line termination: Standard RJ-11 socket
Power fail state: Phone port connected to line 1
Psitek Fusion 500 Router
